RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Effect
The command fails.
Recovery
See the Guardian Procedure Errors and Messages Manual for a description of the recovery
actions for the file-system error. Correct the error indicated by error#, then reenter the command.
Open error error# on report file filename.
error#
is the file-system error number that identifies the specific error.
filename
is the name of the file you specified for generating the report.
Cause
When a VALIDATE CONFIGURATION command is executed, RDFCOM determined that a user
specified file name for report generation could not be opened.
Effect
The command fails.
Recovery
See the Guardian Procedure Errors and Messages Manual for a description of the recovery
actions for the file-system error. Correct the error indicated by error#, then reenter the command.
Operation can only be performed on the BACKUPSYSTEM \backup
backup
is the name of the backup node that can perform the operation.
Cause
The command can be issued only at the backup system.
Effect
The command fails.
Recovery
Enter another command.
Operation can only be performed on the PRIMARYSYSTEM \primary
primary
is the name of the primary node that can perform the operation.
Cause
The command can be issued only at the primary node.
Effect
The command fails.
Recovery
Enter another command.
Operation is NOT allowed when RDF is running
Cause
The command is not allowed while RDF is running.
Effect
The command fails.
Recovery
Enter another command, or shut down RDF and reenter this command.
438 Messages