RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
You must reconfigure your network master and possibly your local configuration.
Position error error# on file remote-config-file
error#
is the file-system error number that identifies the specific error.
remote-config-file
is the name of the remote configuration file.
Cause
The COPYAUDIT command encountered the specified error while attempting to position into the
remote configuration file.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on local image file
error#
is the file-system error number that identifies the specific error.
Cause
The COPYAUDIT command encountered the specified error while attempting to position into a
local image file on the local image trail.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on new image file filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the image trail file associated with the error.
Cause
The COPYAUDIT command encountered the specified error while attempting to position into the
specified image file on the local image trail volume.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on remote image file
440 Messages