RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

error#
is the error number that identifies the specific error.
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting process errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, contact your service provider.
Process procname already used in Control Subvolume Ctrl-subvol.
procname
is the name of the RDF process you specified in the current configuration.
Ctrl-Subvol
is the name of the RDF subsystem control subvolume.
Cause
When a START RDF command or a VALIDATE CONFIGURATION command is executeds,
RDFCOM determined that a user specified process name is already in use in a different RDF
environment.
Effect
The command fails.
Recovery
Assign a new name to the process. Then, reenter the START RDF or VALIDATE command.
Process procname already used in local system.
procname
is the name of the RDF process you specified in the current configuration.
Cause
When a START RDF command or a VALIDATE CONFIGURATION command is executed,
RDFCOM determined that a user specified process name is already in use in a local system.
Effect
The command fails.
Recovery
Assign a new name to the process. Then, reenter the START RDF or VALIDATE command.
Process procname already used in remote system.
procname
is the name of the user specified RDF process name in the current configuration
Cause
During execution of a START RDF command or a VALIDATE CONFIGURATION command,
RDFCOM determined that a user specified process name is already in use in a remote system.
Effect
The command fails.
Recovery
Assign a new name to the process and re-enter the START RDF or VALIDATE command
Program and Library File are the Same
442 Messages