RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Effect
The RDFCOM INITIALIZE RDF command continues.
Recovery
This is an informational message; no recovery is required.
Synch timestamp is synchdbtime
synchdbtime
is a SYNCHDBTIME timestamp specified previously by an operator in an RDFCOM INITIALIZE
RDF command.
Cause
In conjunction with a complete database synchronization, you are attempting to initialize RDF
to a timestamp that is earlier than the current time. A record whose timestamp is less than
synchdbtime has been found, and synchdbtime has been stored in the RDF configuration
record.
Effect
The RDFCOM INITIALIZE RDF command continues.
Recovery
This is an informational message; no recovery is required.
TAKEOVER in progress
Cause
A takeover operation is underway.
Effect
The takeover operation continues.
Recovery
This is an informational message; no recovery is required.
TAKEOVER command is not allowed in an OBEY/IN file without the bang (!)
option.
Cause
TAKEOVER command has been issued through an OBEY/IN file without bang (!) option.
Effect
The TAKEOVER operation is aborted.
Recovery
Specify the bang (!) option along with the TAKEOVER command in the OBEY/ IN file or issue
the TAKEOVER command from RDFCOM command prompt.
The control subvolume name is not presently configured for an RDF primary
system. You must use the OPEN command to open an RDF CONFIG file in an
existing RDF control subvolume, or you must initialize a new RDF
configuration with the INITIALIZE RDF command.
name
is the name of the control subvolume explicitly specified or the primary system name assigned
by default.
Cause
The control subvolume either specified or selected by default does not exist.
Effect
The control subvolume remains undefined.
456 Messages