RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
Reissue the command, specifying a timestamp year that is 1997 or greater.
This aux EXTRACTOR Record already exists.
Cause
You tried to add an EXTRACTOR with a particular ATINDEX value, but there is already one
configured with that value.
Effect
The ADD command fails.
Recovery
Review and revise your RDF configuration.
This aux RECEIVER Record already exists.
Cause
You tried to add an RECEIVER with a particular ATINDEX value, but there is already one
configured with that value.
Effect
The ADD command fails.
Recovery
Review and revise your RDF configuration.
This command is not allowed in an OBEY file.
Cause
An illegal command was encountered within an OBEY command file.
Effect
The command fails.
Recovery
Remove the command from the OBEY command file, and reenter the command directly from
your terminal.
This RDF subsystem is not configured in the network master subsystem
Cause
Your current RDF subsystem is not listed in your the configuration of your network master.
Effect
Validation fails.
Recovery
You must reconfigure your network master and possibly your local configuration.
TMF is having trouble.
Cause
There is a problem with TMF.
Effect
The configuration validation fails.
Recovery
Check the status of TMF. When TMF is operational, reenter the command.
TMF is not configured.
Cause
TMF has not been configured.
462 Messages