RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Cause
You tried to delete an image trail that is still being used by an updater.
Effect
The command fails.
Recovery
Delete the updater, and then delete the image trail.
VOLUME vol-name does not match imagetrail ATINDEX atindex
Cause
You added an updater with the specified ATINDEX, but the IMAGEVOLUME configured for the
updater does not have that value.
Effect
The validation fails.
Recovery
Alter the particular updater’s ATINDEX value to match the appropriate audit trail number or
delete the updater.
VOLUME vol-name is NOT audited to ATINDEX atindex
Cause
You added an updater with the specified ATINDEX, but the primary system data volume to be
protected is not mapped to the audit trail with that audit trail number.
Effect
The validation fails.
Recovery
Alter the particular updater’s ATINDEX value to match the appropriate audit trail number or
delete the updater.
VOLUME volume UPDATEVOLUME does NOT exist
volume
is the volume on the primary node for which the updater is responsible.
Cause
The RDF configuration file is invalid.
Effect
RDF will not start.
Recovery
Bring the volume up, or delete it from the RDF configuration.
VOLUME volume record NOT found
volume
is the volume on the primary node for which the updater is responsible.
Cause
The INFO command could not find an updater record for volume in the configuration file.
Effect
The command fails.
Recovery
Alter the configuration to include the updater process.
WARNING - BACKUPSWAP parameter has no effect, KMSF swap volume takes
precedence
RDFCOM Messages 469