RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

WARNING - PRIMARYSWAP parameter has no effect, KMSF swap volume takes
precedence
Cause
The user attempted to SET or ALTER the RDF PRIMARYSWAP parameter.
Effect
This parameter no longer has any effect. The KMSF subsystem controls the placement of the RDF
processes’ swap files.
Recovery
This is an informational message; no recovery is required.
* * * WARNING * * * RDF will start at the first record in the TMF master
audit trail beyond the specified shutdown timestamp. RDF will ignore
all audit generated before this timestamp.
Cause
You entered an INITIALIZE RDF command that attempted to initialize RDF at a specific TMF
shutdown timestamp.
Effect
RDF is ready to start reading the Master Audit Trail (MAT).
Recovery
This is an informational message; no recovery is required.
* * * WARNING * * * RDF will start at the first record in the TMF master
audit trail whose timestamp is less than the specified timestamp. The
timestamp you specified must follow the documented guidelines.
Cause
You are attempting to initialize RDF in conjunction with a complete database synchronization.
Effect
If an audit record can be found whose timestamp is less than the specified timestamp, RDF is
initialized to that record.
Recovery
This is an informational message; no recovery is required.
* * * WARNING * * * RDF will start at the first record in the TMF master
audit trail whose timestamp is less than the specified timestamp. The
timestamp you specified must follow the documented guidelines. Please
note that RDFCOM will subtract an additional three minutes from the
specified timestamp to ensure a safe restart position.
Cause
You are attempting to initialize RDF to a timestamp that is earlier than the current time, and
database synchronization is not involved.
Effect
If an audit record can be found whose timestamp is less than the specified timestamp, RDF is
initialized to that record. If you were running RDF prior to this initialization command, you should
take into consideration the highest updater RTD. In addition, RDFCOM subtracts another three
minutes from the specified timestamp to ensure that the starting position in the audit trail is a
safe one.
Recovery
This is an informational message; no recovery is required.
*** WARNING *** REPLICATEPURGE is not turned ON.
RDFCOM Messages 471