Spooler FASTP Network Print Processes Manual

Installation and Configuration Considerations for
FASTPTCP
Spooler FASTP Network Print Processes Manual — 427528-007
3 - 47
Running the FASTKCUT Utility Program
DELETE kcon-file,device
deletes a device from a FASTKCON file.
kcon-file
specifies an existing FASTKCON file. If the specified FASTKCON file is
$SYSTEM.SYSTEM.FASTKCON, an asterisk (*) can be used in place of
the complete file name.
device
specifies the name of a device within the FASTKCON file that is to be
deleted from the specified FASTKCON file.
Note that the only impact of the DELETE command on printer operation is that
the specified device is deleted.
UPDATE cnfg-file,kcon-file
updates an existing FASTKCON file using DEVICE, DEFAULT, and POLLTYPE
information in the specified FASTCNFG file.
cnfg-file
specifies the FASTCNFG file, which must be an EDIT file (file type 101), to
be used as input when updating the FASTKCON file. If the specified
FASTCNFG file is $SYSTEM.SYSTEM.FASTCNFG, an asterisk (*) can be
used in place of the complete file name.
kcon-file
specifies the name of an existing FASTKCON file whose information will be
updated based on DEVICE and DEFAULT information in cnfg-file. If
the specified FASTKCON file is $SYSTEM.SYSTEM.FASTKCON, an
asterisk (*) can be used in place of the complete file name.
Device information in the FASTKCON file will be updated according to the
following rules:
•
If a device specified in cnfg-file already exists in kcon-file, the
existing device record in kcon-file is erased and replaced by the
information in cnfg-file.
•
If a device specified in cnfg-file does not already exist in kcon-
file, it is added to kcon-file.
•
If a device already exists in kcon-file and is not specified in cnfg-
file, the existing device records are unchanged.
If kcon-file does not exist, it will be created as a new FASTKCON file.
The UPDATE command can have a slight imp
act on printer operation. When
an existing record is updated, it is locked by the file system until the update is