Spooler FASTP Network Print Processes Manual

Spooler FASTP Network Print Processes Manual — 427528-007
4 - 1
4
Installation, Configuration, and
Usage Considerations for
FASTPSMB
The FASTPSMB print process allows you to use the Spooler to print documents on
printers attached to HP NonStop systems through an SMB LAN print server.
The FASTPSMB print process uses the following communications standards:
•
NetBIOS
•
Server Message Block (SMB) protocol
The FASTPSMB environment consists of the following components:
•
FASTPSMB print process
•
FASTCNFG device configuration file
This section describes the following installation, configuration, and usage
considerations for the FASTPSMB print process:
•
Installation Requirements for both D-series and G-series systems
•
Installation and Configuration Tasks for FASTPSMB
•
Spooler Configuration Considerations for FASTPSMB
•
FASTCNFG DEVICE Configuration for FASTPSMB
•
User-Mode Access Considerations for FASTPSMB
•
Where to Find Information About NetBIOS and SMB Error Messages
Note. The information in this section applies to D- and G-series RVUs only.