Spooler FASTP Network Print Processes Manual

What’s New in This Manual
Spooler FASTP Network Print Processes Manual — 427528-007
x
New and Changed Information
•
Added error numbers 1001 through 1024 in FASTP EMS 512 Text Messages on
page B-61.
Changes in 427528-006 manual:
Updated Address description in FASTCNFG DEVICE Attributes for All FASTPTCP
Devices on page 3-15.
Changes in 427528-004 manual:
This manual supports D-, G-, H- and J-series RVUs. The differences between these
RVUs are that the following products are only supported on D- and G-series RVUs:
TSM, FOX, IPX/SPX, and Parallel Library TCP/IP.
This manual includes the following changes:
•
Added information to bit 13 in Table 2-4, Supported DEV PARM Attribute Bit Values
for FASTP Network Print Processes, on page 2-11.
•
Added H-series RVUs to Installation Requirements on page 3-3.
•
Added a paragraph to Bit Number 2 in Table 3-1, Supported PRINT PARM Attribute
Bit Values for FASTPTCP Processes (Beginning with the G06.10 and D48.02
RVUs), on page 3-11.
•
Added and changed information under Optional DEVICE Attributes for All
FASTPTCP Devices on page 3-18.
•
Added information to Optional DEVICE Attributes for HP JetDirect Printers on
page 3-27.
•
Added and changed information under Optional DEVICE Attributes for Lexmark
Printers on page 3-32.
•
Optional DEVICE Attributes for Printers Connected Through Microplex Servers on
page 3-34.
•
Added and changed information under FASTCNFG DEVICE Attributes for Devices
Connected to Line Printer Daemons (LPDs) on page 3-35.
•
Added the statement, “This parameter is used only if PRINTBANNER=YES” to the
JOBNAME, BANNERCLASS, and BURSTBANNER attributes under
Additional
LPD Job Information Attributes on page 3-38.
•
Indicated that Section 4, Installation, Configuration, and Usage Considerations for
FASTPSMB and Section 5, Installation, Configuration, and Usage Considerations
for FASTPNOV are only supported for D- and G-series RVUs.
•
Added information on Installation Requirements on page 6-2 for H-series systems.
•
Added information on Installation Requirements on page 7-2 and Ethernet Port
Configuration Considerations on page 7-3 for H-series RVUs.
•
Added DATA=filename attribute and incorporated it into the syntax statement under
Reading an Unstructured Shadow Trace File on page 8-9.