Spooler FASTP Network Print Processes Manual

Installation, Configuration, and Usage
Considerations for FASTPNOV
Spooler FASTP Network Print Processes Manual — 427528-007
5 - 9
Sample FASTCNFG File for FASTPNOV
specifies whether bit translation or character substitution should occur. Refer to
Appendix A, Bit Translation and Character Substitution, for more information about
bit translation and character substitution. NONE specifies that no bit translation or
character substitution should occur. The CHARSET specification is optional. The
default value is NONE.
SHADOW[n] = shadow-file-namen...
is a required attribute if tracing is enabled (that is, if bit 1 (%40000) of the PARM
device attribute is set). Each value specified defines the name of a Guardian file
used for trace output. If the file name is not fully qualified, the volume and
subvolume name default to the volume and subvolume where the object code for
the FASTPNOV print process resides. From 1 to 8 trace files can be defined.
Tracing is discussed in Section 8, Troubleshooting and Using the Trace Facility.
TIMEOUT = interval
specifies the number of seconds a FASTPNOV print process waits before
considering an I/O operation to be a failure. The TIMEOUT specification is
optional. The default value is 0, which causes FASTPNOV to wait indefinitely or
until the I/O process for the device declares the operation a failure.
Sample FASTCNFG File for FASTPNOV
Example 5-1 contains a sample FASTCNFG file for a FASTPNOV print process:
Example 5-1. Sample FASTCNFG File for FASTPNOV
DEVICE $NOV
CONTYPE = NETWARE
SERVER = Sales-Server
QUEUE = OrderQueue
USERID = JohnDoe
PASSWORD = secret