Spooler FASTP Network Print Processes Manual

Installation, Configuration, and Usage
Considerations for FASTPNOV
Spooler FASTP Network Print Processes Manual — 427528-007
5 - 11
Spoolcom BATCH Subcommand Considerations for
FASTPNOV
Spoolcom BATCH Subcommand
Considerations for FASTPNOV
You can alter attributes and change the STATUS of any batch job by using the
Spoolcom BATCH command and subcommands.
For a complete list of the Spoolcom BATCH subcommands supported by all the FASTP
network print processes, see Table 2-12, Spoolcom BATCH Subcommands and Their
Effect on FASTP Network Printers, on page 2-40.
Table 5-3 lists the Spoolcom BATCH subcommands that have special considerations
for FASTPNOV and describes their effect on NetWare print queues.
Table 5-3. Spoolcom BATCH Subcommands With Special Effects on NetWare
Print Queues
Attribute Effect on NetWare Print Queues
COPIES Specifies the number of copies of this job to be printed.
The FASTPNOV print process sends each job in a batch to a NetWare
print que
ue.
FORM Specifies the form to be used.
All jobs within a batch must use the same form.
The form is defined on the NetWare LAN.
The form name cannot exceed 16 characters.
The form name must begin with a letter.
The default form (that is, when no form is specified) is the default form
def
ined for the NetWare print queue on the NetWare LAN.
HOLDAFTER Attribute not applicable to NetWare print queues.
OWNER The OWNER string is the Banner Name field for NetWare print jobs.
REPORT The effect of the REPORT subcommand is the same as for any other
S
pooler printer. The REPORT string also is part of the Job Description
field for NetWare print jobs.