Spooler FASTP Network Print Processes Manual

Spooler FASTP Network Print Processes Manual — 427528-007
xiii
About This Manual
This manual describes the Spooler FASTP network print processes: FASTPTCP,
FASTPSMB, FASTPNOV, FASTPX25, and FASTPXNS.
Print processes retrieve the output stored on disk by the S
pooler collector and print it
on a device. The standard FASTP print process, which is released with the Spooler
product, is called FASTP. The configuration of the standard FASTP print process is
described in the Spooler Utilities Reference Manual.
The FASTP network print processes are enhanced versions of F
ASTP that allow you to
use the Spooler to print documents on printers attached to HP NonStop systems
through HP NonStop TCP/IP local area networks (LANs), SMB LANs, Netware LANs,
X.25 WANs, and XNS LANs.
This manual provides the instructions for installing and configuring each of the FASTP
network print process products, includes usage considerations when they apply,
describes how to use the trace facility for these processes, and includes descriptions of
the EMS messages generated by these processes.
Before a FASTP network print process can be installed and configured, the following
products must be installed and configured:
•
Spooler
•
The network data communications product (IOP subsystem) used by your FASTP
network print process
•
The network used by your FASTP network print process
The following table summarizes the contents of this manual:
Section Title
Section 1
Overview of Spooler FASTP Network Print Processes
Section 2 Installing and Configuring FASTP Network Print Processes
Section 3 Installation and Configuration Considerations for FASTPTCP
Section 4 Installation, Configuration, and Usage Considerations for FASTPSMB
Section 5 Installation, Configuration, and Usage Considerations for FASTPNOV
Section 6 Installation and Configuration Considerations for FASTPX25
Section 7 Installation, Configuration, and Usage Considerations for FASTPXNS
Section 8 Troubleshooting and Using the Trace Facility
Appendix A Bit Translation and Character Substitution
Appendix B EMS Messages