Spooler FASTP Network Print Processes Manual

Troubleshooting and Using the Trace Facility
Spooler FASTP Network Print Processes Manual — 427528-007
8 - 9
Reading Trace Output
Table 8-2 summarizes the identifier and data records that can only appear in
FASTPTCP trace files.
Reading an Unstructured Shadow Trace File
An unstructured format shadow trace file is only supported by FASTPTCP.
To format and view the trace output of an unstructured shadow trace file, use the
SHAP utility
, which is automatically installed in $dsv.ZTCPPRT when FASTTCP is
installed.
To run the SHAP utility, enter the following command:
where
shadow-file
specifies the name of the unstructured shadow output file produced by FASTPTCP.
Supervisor - DEV Status Out Request sent to supervisor process to solicit status
of a device.
Supervisor - Job Status In Response received from supervisor process
cont
aining status for a job.
Supervisor - Job Status Out
Request sent to supervisor process to solicit status
of a job.
Table 8-2. FASTPTCP Identifier Records and Data Records
Types of Identifier Records Contents of Data Record for Trace Event
Completion Indicates the outcome of a previous operation.
Connect Indicates that FASTP attempted to establish a
TCP/IP Conne
ction.
Shutdown Indicates that a TCP Connection was shutdown.
SNMP Get The UDP datagram sent to the SNMP agent.
SNMP Resp The UDP datagram received from the SNMP agent.
Socket Indicates Socket establishment.
RUN $dsv.ZTCPPRT.SHAP/IN shadow-file,OUT list-file/[CRLF,ASC,
DATA=filename]
Table 8-1. Common FASTP Network Print Process Identifier Records and Data
Records (page 2 of 2)
Types of Identifier Records Contents of Data Record for Trace Event