Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 3
FASTPTCP Event Messages
2
proc-name
is the process name of the FASTPTCP process.
Cause. The FASTPTCP process is stopping after being idle for two minutes. This
message is generated only when bit 14 (%2) of PRINT PARM is set.
Effect. None; this message is an informational message only.
Recovery. FASTPTCP is automatically restarted by the Spooler when another job is
ready to print.
3
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
job-num
is the job number.
Cause. The FASTPTCP process started printing a job. This message is generated
only when bit 14 (%2) of PRINT PARM is set and is displayed only in EMS event
format.
Effect. None; this message is an informational message only.
Recovery. Informational message only; no corrective action is needed.
proc-name Fastptcp stop
proc-name DEV: device-name Job #job-num start