Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 4
FASTPTCP Event Messages
4
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
job-num
is the job number.
byte-count
is the approximate number of bytes sent to the device. This count includes any
formatting characters, such as carriage returns and line feeds, added by
FASTPTCP.
Cause. The FASTPTCP process successfully finished printing a job. This message is
generated only when bit 14 (%2) of PRINT PARM is set and is displayed only in EMS
event format.
Effect. None; this message is an informational message only.
Recovery. Informational message only; no corrective action is needed.
5
proc-name
is the process name of the FASTPTCP process.
param2, param3
are parameters that further describe the internal error.
Cause. An unexpected internal error condition was detected within the F
ASTPTCP
process.
Effect. The FASTPTCP process abends and might create a Z
ZSAnnnn Saveabend
file.
proc-name DEV: device-name Job #job-num complete, bytes byte-
count
proc-name Internal Error 2: %param2, %param3