Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 23
FASTPTCP Event Messages
41
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
hex-data
is a hexadecimal display of some of the data received from the printer.
Cause. The FASTPTCP process has been configured with DRAIN=YES, and
DRAINLOG=YES received input data from the printer.
Effect. This message is informational only.
Recovery. If no other errors occur, no action is needed. To eliminate this message, set
DRAINLOG=NO. For more information, see the description of message number 69.
42
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
err-num
is a file-system error code or other internal F
ASTPTCP error code.
Cause. The FASTPTCP process could not allocate a workspace for MBCS translation.
Effect. The Spooler job is requeued, and the S
pooler device is placed offline.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems on page 8-1.
proc-name DEV: device-name Inbound data received by DRAIN
option - starting with: hex-data
proc-name DEV:device-name Cannot obtain buffer for MBCS
Translation, Err: err-num