Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 28
FASTPTCP Event Messages
48
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
file-err
is the file-system error returned. See the Guardian Procedure Errors and
Messages Manual for explanations of file-system errors.
supervisor-name
is the name of the Spooler supervisor process.
Cause. The FASTPTCP process attempted to open the Spooler supervisor process to
obtain information but was unable to do so for the reason indicated. For example, the
FASTPTCP process opens the Spooler supervisor to obtain details about certain
NetBatch jobs, or when jobs are routed to a Spooler collector process.
Effect. The FASTPTCP process attempts to complete printing without this information.
Recovery. Verify that the Spooler is properly configured and is running. If the error
persists, contact your service provider as described in Troubleshooting and Reporting
Problems on page 8-1.
proc-name DEV: device-name Cannot OPEN Supervisor for Status,
Err: file-err on supervisor-name