Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 32
FASTPTCP Event Messages
54
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
file-err
is the file-system error. See the Guardian Procedure Errors and Messages Manual
for explanations of file-system errors.
file-name
is the shadow trace file name.
Cause. An error occurred during a write to the shadow trace file.
Effect. Shadow tracing is stopped for the device.
Recovery. Ensure that the disk drive has free space.
55
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
job-num
is the job number.
Cause. A Job or FONT job contains one or more CONTROLBUF 103 calls to load top-
of-form substitutions and the sp
ace allocated to hold these was exceeded.
Effect. The FASTPTCP process prints the job, but the job might not pr
int as intended.
Recovery. Reduce the complexity of CONT
ROLBUF 103 calls in the print and/or font
job. If the error persists, contact your service provider as described in
Troubleshooting
and Reporting Problems on page 8-1.
proc-name DEV: device-name Error file-err when writing to
Shadow File file-name
proc-name DEV: device-name Top Of Form Substitution limit
(2048) exceeded in Job: job-num