Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 37
FASTPTCP Event Messages
63
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
param3
is a value for FASTPTCP development use only.
Cause. This message is for FASTPTCP development use only and is generated only
when bit 2 (%20000) of PRINT PARM is used.
Effect. None; this message is an informational message only. It does not affect job
printing.
Recovery. Informational message only; no corrective action is needed.
64
proc-name
is the process name of the FASTPTCP process.
param2, param 3, param4
are values for FASTPTCP development use only.
Cause. This message is for FASTPTCP development use only and is generated only
when bit 2 (%20000) of PRINT
PARM is used.
Effect. None; this message is an informational message only. It does not affect job
printing.
Recovery. Informational message only; no corrective action is needed.
proc-name DEV: device-name printreadcommand param3
proc-name Dev ioc File param2 Fecode param3 Count param4