Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 49
FASTPTCP Event Messages
Cause. The FASTPTCP process encountered a TCP/IP socket error. This message is
usually accompanied by another message; refer to the documentation for that
message for details.
Effect. Varies based on the operation and error. Possible effects include the following:
•
The job might have printed partially or not at all.
•
The print might be requeued to the Spooler.
•
The Spooler device might be placed offline.
Recovery. Varies based on the operation and error. Possible recovery actions include
the following:
•
Correct the network error.
•
Ensure the device is online and is not out of paper.
•
Restart the Spooler device. (Depending on the device configuration, the device
might restart automatically.)
80
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
Cause. The FASTPTCP process could not connect to the remote device after 60
consecutive attempts.
Effect. None; this message is informational only
. The FASTPTCP process continues
to attempt to complete a connection.
Recovery. If the message persists, verify the following:
•
The ADDRESS parameter matches the IP address of the remote device.
•
An operational network path to the device exists.
•
The device is online and properly configured.
proc-name DEV: device-name Connection timeout: device offline
or possible network or address problem