Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 54
FASTPTCP Event Messages
86
proc-name
is the process name of the FASTPTCP process.
type
is either a FASTCNFG or FASTKCON file.
file-name
is the name of the FASTCNFG or FASTKCON file specified by the ADD DEFINE
command.
Cause. The ADD DEFINE =FASTCNFG or ADD DEFINE =FASTKCON command was
used when the Spooler supervisor was started to specify an alternate FASTPTCP
configuration file. This message clearly indicates that a configuration file other than the
default is in use.
Effect. None; this message is an informational message only.
Recovery. Informational only; no corrective action is needed.
87, 88, 89, 90
is the process name of the FASTPTCP process.
device-name
is the device name of the printer
.
additional-information
is for additional information. Refer to the appropriate third-party documentation.
Cause. This message is generated by third-p
arty encryption software using the secure
sockets layer (SSL) interface to FASTPTCP. For additional information, refer to the
documentation from the third-party software provider.
Effect. For additional information, refer to the documentation from the third-party
software provider.
Recovery. For additional information, refer to the documentation from the third-party
software provider.
proc-name Using alternate type configuration file file-name
proc-name DEV: device-name additional-information