Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 62
FASTP EMS 512 Text Messages
Effect. The bulk data transfer phase is initiated by a Courier PRINT Remote
Procedure Call. FASTPXNS attempts to complete the RPC by sending an End of
Message so that the reason for the ABORT can be ascertained. The device is placed
offline.
Recovery. The reason for the ABORT is reported in the companion message:
proc-num DEV: device-name, BulkData Transfer Err nn text
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
nn
is the remote error code from the Xerox PRINT RPC.
text
is the RPC error code in text form. The possible remote error codes and their
corresponding text are:
00 Busy
01 Insufficient Xerox Spool Space
02 Invalid Print Parameters
03 Master Too Large
04 Medium Unavailable
05 Service Unavailable
06 Xerox Spooling Disabled
07 Xerox Spooler Queue Full
08 System Error
09 Too Many Clients
10 Undefined
12 Transfer Error
nn Unknown
Cause. This message applies to FASTPXNS only. The Courier PRINT RPC completed
with the specified error. As a result the bulk data transfer phase did not complete
processing. The most likely cause of this error is if the Xerox HIP buffers become full
while the job is being sent.
Effect. The device is placed offline.
proc-num DEV: device-name BulkData Transfer Err nn text