Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 73
FASTP EMS 512 Text Messages
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
job-num
is the job number.
Cause. An error was returned by the Spooler PRINTREAD procedure indicating that
the data for the specified job was invalid or missing.
Effect. The device is placed offline.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems on page 8-1.
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
%nnnnnn
is the error returned by the DEVICEINFO2 procedure.
Cause. This message applies to FASTPX25 only
. Because of a DEVICEINFO2 error,
FASTPX25 could not verify the CONTYPE was X25.
Effect. The device is placed offline.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems on page 8-1.
proc-num DEV: device-name Data for Job job-num is bad
proc-num DEV: device-name DEVICEINFO2 Error %nnnnnn