Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 86
FASTP EMS 512 Text Messages
Recovery. If this error concerns an operation on behalf of a FASTPXNS controlled
device, a later operation will probably time out and a subsequent message should
identify the operation in error. This error might have nothing to do with the Xerox
printer. If no further problems arise, it can be ignored. If the error persists, contact your
service provider as described in Troubleshooting and Reporting Problems on page 8-1
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
cnfg-file
is the name of the FASTCNFG file.
Cause. This message applies to all FASTP network print processes except
FASTPTCP. The connection type (CONTYPE) value specified for a device in the
specified FASTCNFG file is not a valid value.
Effect. The Spooler device is placed offline; the FASTP network print process
continues processing other print jobs.
Recovery. Correct the error in the FASTCNFG file. Note that the value of the
Spoolcom DEV EXCLUSIVE attribute can affect whether changes to the FASTCNFG
file are read. The FASTP network print process reads the updated FASTCNFG file
before it sends a job to the device if the device has the Spoolcom DEV EXCLUSIVE
attribute set to EXCLUSIVE OFF (the default). If the device has the EXCLUSIVE
attribute set to EXCLUSIVE ON, the attribute must be changed to EXCLUSIVE OFF! to
force the FASTP network print process to read the updated FASTCNFG file. For more
about the effect of the EXCLUSIVE attribute on the FASTCNFG file, see FASTCNFG
File Alteration on page 2-19.
If the error persists, contact your service provider as described in
Troubleshooting and
Reporting Problems on page 8-1.
proc-num DEV:device-name Illegal CONTYPE in cnfg-file