Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 109
FASTP EMS 512 Text Messages
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
%nnnnnn
is the ACK value FASTPXNS received.
%mmmmmm
is the ACK value FASTPXNS expected to receive.
Cause. This message applies to FASTPXNS only. FASTPXNS encountered an out of
sequence XNS Level 2 ACK from the specified device. Sequenced Level 2 messages
are typically used when transferring data to be printed. This error indicates a protocol
violation by either party. Data might have been lost.
Effect. The device is placed offline.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems on page 8-1.
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
%nnnnnn
is the ACK value FASTPXNS received.
%mmmmmm
is the ACK value FASTPXNS expected to receive.
proc-num DEV: device-name Out of Sequence Level2 Ack Recd:
%nnnnnn Exp: %mmmmmm
proc-num DEV: device-name Packet Not Recovered: Ack Recd:
%nnnnnn Exp: %mmmmmm