Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 125
FASTP EMS 512 Text Messages
retries
indicates the number of times FASTPXNS retried the request.
time
indicates the time (in units of 10 milliseconds) that FASTPXNS waited for a
response from the printer.
Cause. This message applies to FASTPXNS only. FASTPXNS could not obtain an
XNS connection.
Effect. Error 104 is returned to the Spooler supervisor.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems on page 8-1.
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
nnnnnn
indicates the number of times FASTPXNS sent the packet.
time
indicates the time (in units of 10 milliseconds) that FASTPXNS waited for a
response.
seq-num
indicates the Send Sequence number in the packet that was sent.
Cause. This message applies to F
ASTPXNS only. FASTPXNS could not obtain a
response to a Sequence Packet transmission.
Effect. Error 104 is returned to the S
pooler supervisor.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems on page 8-1.
proc-num DEV: device-name Time Out Waiting For SPP Response -
R: nnnnnn T: time S: seq-num