Spooler FASTP Network Print Processes Manual

EMS Messages
Spooler FASTP Network Print Processes Manual — 427528-007
B - 128
FASTP EMS 512 Text Messages
svc
is the SVC in use.
job-num
is the job number.
Cause. This message applies to FASTPX25 only. This error is generated when
FASTPX25 opens an SVC. It is only recorded when bit 2 (%20000) of the PARM
attribute of the Spoolcom DEV command is set.
Effect. This message is intended to be used a debugging aid.
Recovery. Informational message only.
512
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
param-name
is one of the attributes for FASTPSMB devices.
cnfg-file
is the name of the FASTCNFG file.
Cause. This message applies to FASTPSMB only
. The specified parameter had an
invalid value specified in the FASTCNFG file.
Effect. No printing occurs, the Spooler job is requeued
, and the Spooler device is
placed offline.
Recovery. Correct the parameter, and restart the Spooler device. (Depending on the
device configuration, the device might restart automatically.)
proc-num DEV: device-name param-name value in cnfg-file is
invalid