Spooler FASTP Network Print Processes Manual

Installing and Configuring FASTP Network Print
Processes
Spooler FASTP Network Print Processes Manual — 427528-007
2 - 40
Using the Spoolcom BATCH Command to Manage
Batch Jobs
Table 2-12. Spoolcom BATCH Subcommands and Their Effect on FASTP
Network Printers (page 1 of 2)
Subcommand Effect on FASTP Network Printers
COPIES Specifies the number of copies to be printed. In most instances, the effect
of
COPIES is the same as that of any other Spooler printer, but the effect
can vary based on the specific FASTP network print process being
implemented. See the product-specific sections of this manual for any
special considerations that might apply.
DELETE Deletes all jobs associated with the specified batch number. The effect of
DELETE is the same
as that of any other Spooler printer within the
Spooler subsystem. This parameter is not transmitted to the print
process.
FORM Specifies the form to be used. All jobs within a batch must use the same
form. In most inst
ances, the effect of FORM is same as that of any other
Spooler printer, but the effect can vary based on the specific FASTP
network print process being implemented. See the product-specific
sections of this manual for any special considerations that might apply.
HOLD Places the batch job in the HOLD state. The effect of HOLD is the same
as that
of any other Spooler printer within the Spooler subsystem. This
parameter is not transmitted to the print process.
HOLDAFTER Places the batch job in the HOLD state after it is printed. In most
instances, the effect of HOLDAFTER is the same as that of any other
Spooler printer, but the effect can vary based on the specific FASTP
network print process being implemented. See the product-specific
sections of this manual for any special considerations that might apply.
This parameter is not transmitted to the print process.
LINK Causes the specified job to become linked to the current batch job. The
ef
fect of LINK is the same as that of any other Spooler printer within the
Spooler subsystem. This parameter is not transmitted to the print
process.
LOC Specifies a new location for the batch job. The effect of LOC is the same
as that
of any other Spooler printer within the Spooler subsystem. This
parameter is not transmitted to the print process.
OWNER Designates a new owner for the batch job. In most instances, the effect of
OWNER is th
e same as that of any other Spooler printer, but the effect
can vary based on the specific FASTP network print process being
implemented. See the product-specific sections of this manual for any
special considerations that might apply. This parameter is not transmitted
to the print process.
REPORT Changes the report name for the batch job. In most instances, the effect
of
REPORT is the same as that of any other Spooler printer, but the
effect can vary based on the specific FASTP network print process being
implemented. See the product-specific sections of this manual for any
special considerations that might apply. This parameter is not transmitted
to the print process.