TS/MP 2.5 Management Programming Manual

Table 34 Limits and Defaults for Parameters
Value Limits and DefaultsSPI Token/FieldPATHCOM Parameter
ZPWY-TKN-DEFSCARGLISTARGLIST Values: OSS process startup argument list; from 2 to
24,000 characters.
ZPWY-TKN-DEF-SCENV +
ZPWY-TKN-DEF-SCARGLIST cannot exceed
24,000 bytes.
Default: Empty argument list
ZASSOCIATIVEASSOCIATIVE Values: ON | OFF
Default: OFF
ZAUTORESTARTAUTORESTART Values: 0 to 32,767
Value be greater than 0.
Default: 0
ZCPUBACKUPCPU Values: 0 to 15
ZCPUPAIR Value be a CPU number that is greater than plus
or minus 1 from the primary CPU.
Default: Depends on command
N.A.COUNT Values: 0 to 65,536
Default: 1
ZCPUCPU Values: For CPU pairs, maximum of 16 pairs, 0 to 15.
ZCPUPAIRCPUS Backup CPU numbers need not be unique.
For a sequence of single CPUs, maximum of 16
CPUs, 0 to 15. Each CPU must be unique.
Default: Determined by PATHMON (all available CPUs
are used).
ZCREATEDELAYCREATEDELAY Values: HRS | MINS | SECS
0 to 16,383 SECS, or
0 to 1092 MINS, or
0 to 18 HRS
The time set for this parameter may be added to
the response time for all transactions; therefore,
the value be small.
Default: 1 MINS
ZPWY-TKN-DEFSCCWDCWD Values: Absolute OSS pathname of the current working
directory.
Default: None
ZDEBUGDEBUG Values: ON | OFF
Default: OFF
ZDELETEDELAYDELETEDELAY Values: HRS | MINS | SECS
0 to 16,383 SECS, or
0 to 1092 MINS, or
0 to 18 HRS
Default: 10 MINS
373