TS/MP 2.5 Management Programming Manual

Table 34 Limits and Defaults for Parameters (continued)
Value Limits and DefaultsSPI Token/FieldPATHCOM Parameter
Total of MAXSERVERS values for all server classes
must not exceed value of
MAXSERVERPROCESSES.
Default: 1
ZMAXSPIMAXSPI Values: 1 to 100
Maximum number of concurrent openers of
PATHMON (TCP, external TCP, ACS subsystem
processes, PATHCOM, and SPI) must not exceed
800.
For production, the value for this attribute be
large enough to allow for parallel interfaces
(multiple PATHCOM and SPI processes).
Default: 1
ZMAXSTARTUPSMAXSTARTUPS Values: 0 to 4095
Value must not exceed value of
MAXSERVERCLASSES.
Default: N.A.
ZMAXTCPSMAXTCPS Values: Total of values for MAXTCPS, MAXEXTERNALTCPS,
and MAXLINKMONS must not exceed 800.
Maximum number of concurrent openers of
PATHMON (TCP, external TCP, ACS subsystem
processes, PATHCOM, and SPI) must not exceed
800.
Recommended value if Pathway/TS is not installed
at your site: 0
ZMAXTELLQUEUEMAXTELLQUEUE Values: 0 to 300
Recommended value if Pathway/TS is not installed
at your site: 0
ZMAXTELLSMAXTELLS Values: 0 to 4095
Recommended value if Pathway/TS is not installed
at your site: 0
ZMAXTERMSMAXTERMS Values: 0 to 4095
Recommended value if Pathway/TS is not installed
at your site: 0
ZMAXTMFRESTARTSMAXTMFRESTARTS Values: Unlimited restarts-1
0 No restarts
1 to 32,767 Number of restarts
Default: 5
ZMODEMODE Values: ORDERLY | ABORTTERM | IMMEDIATE
Default: ORDERLY
ZACCESSN.A. Values: I/O | INPUT | OUTPUT
Default: No value is passed.
ZEXCLUSIONN.A. Values: EXCLUSIVE | SHARED| PROTECTED
376 Configuration Limits and Defaults