TS/MP 2.5 Management Programming Manual

Entering values for ZPRIMARY and ZBACKUP is optional in multiprocessor

environments; the system assigns CPUs if you do not designate any.

ZDEBUG

determines whether the server enters debug mode on startup. The valid values are:

ZPWY-VAL-OFF Directs the server process not to enter debug mode.

ZPWY-VAL-ON Directs the server process to enter debug mode. If the

PATHMON process was started with INSPECT ON or the server

program was compiled or bound with the Inspect process

defined, the servers enter Inspect mode for debugging.

For more information about Inspect mode, see the Inspect

Manual. For information regarding errors that can occur when

a server process is in debug mode, see the TS/MP 2.5

Pathsend and Server Programming Manual.

If you do not assign a value to this field, then the default is the value specified for

the same field in ZPWY-DDL-DEF-SC.

ZGUARDIANSWAP

specifies the Guardian name of the disk volume for the server swap file formerly

used by the operating system for memory swaps of the server data area. Allocation

of this swap file is handled by the Kernel-Managed Swap Facility (KMSF) on behalf

of the PATHMON process, and the value for this attribute is not used. However, if

you specify a value for this parameter, it must represent an existing device, else an

error occurs.

ZHOMETERM

is the name of the home terminal for the server processes in this server class.

The node name can be either a specific node name or \*, a generic name

representing the node on which the PATHMON process is currently running. If you

do not specify a node name, the default node for the file-name expansion is

determined by the value you specify for the ZNODEINDEPENDENT field of the

START PATHWAY command.

ZPRIORITY

is the priority at which the server process runs. Valid values range from 1 to 199.

If you do not assign a value to this field, then the default is the value specified for

the same field in ZPWY-DDL-DEF-SC.

ZPWY-MAP-DEF-SCSTARTUP

This token defines the character string sent to a Guardian server process in the startup message.

def ZPWY-DDL-DEF-SCSTARTUP.

token-type ZSPI-DDL-INT.

02 ZLENGTH

token-type ZPWY-DDL-CHAR132.

02 ZAREA

end.

ZLENGTH

is the length, in bytes, of the startup string. Valid values range from 0 to 132.

94 ZPWY-MAP- Definitions