TS/MP 2.5 Management Programming Manual

ZAREA
is the startup string value.
ZPWY-MAP-PAR-CONTROL-PM
This token defines PATHMON process attributes that can be changed by using the CONTROL PM
command.
token-type ZPWY-DDL-CPU.
def ZPWY-DDL-PAR-CONTROL-PM.
02 ZBACKUPCPU
token-type ZPWY-DDL-ON-OFF.
02 ZDUMPINFO.
03 ZDUMP
token-type ZSPI-DDL-FNAME32.
03 ZDUMPFILE
token-type ZPWY-DDL-FILESTATE-VALUE.
02 ZLOG1INFO.
03 ZSTATE
token-type ZPWY-DDL-ON-OFF.
03 ZSTATUS
token-type ZPWY-DDL-ON-OFF.
03 ZEVENTFORMAT
token-type ZSPI-DDL-FNAME32.
03 ZFILE
token-type ZPWY-DDL-FILESTATE-VALUE.
02 ZLOG2INFO.
03 ZSTATE
token-type ZPWY-DDL-ON-OFF.
03 ZSTATUS
token-type ZPWY-DDL-ON-OFF.
03 ZEVENTFORMAT
token-type ZSPI-DDL-FNAME32.
03 ZFILE
token-type ZPWY-DDL-CPU.
02 ZSPREBALANCECPU
end.
NOTE: Any field in this structure can be changed independently of any other field. If you change
the value for a field and do not explicitly assign a value to other fields, the other fields retain their
original values.
ZBACKUPCPU
specifies the CPU where the PATHMON backup process runs. PATHMON stops its
existing backup process and creates a new backup process in the CPU you specify.
ZDUMPINFO
specifies whether PATHMON writes the data stack information and the contents of
the PATHMON configuration file to a file, and specifies the name and location of
the dump file, if it encounters an internal error. The fields are described under
“ZPWY-DDL-DUMP-INFO” (page 62).
If no file name is specified for ZDUMPFILE, the PATHMON process uses a file of
the form ZZPMnnn, where nnn is a 3-digit number. The file code is 130.
ZLOG1INFO and ZLOG2INFO
specify the files that the PATHMON process and the Pathway/iTS TCPs use for
reporting errors and changes in object status. The PATHMON process records
whether logging is enabled or disabled in the PATHMON configuration file. After
a cool start (a start in which a previous PATHMON configuration exists) the log
files are set to the state indicated in the configuration file.
ZLOG1INFO and ZLOG2INFO have these subfields:
ZSTATE
indicates whether to open the log file. The valid values are:
ZPWY-MAP-PAR-CONTROL-PM 95