TS/MP 2.5 Management Programming Manual

specifies whether to disregard the PATHMON configuration file. The valid values

are:

ZPWY-VAL-NO

for a cold start, specifies not to cold start the subsystem if a PATHMON configuration

file can be used to cool start.

For a cool start, specifies to return an error if an unexpected PATHMON process

name is encountered in the PATHCTL file.

ZPWY-VAL-YES

for a cold start, specifies to start the subsystem regardless of whether a PATHMON

configuration file is present. The PATHMON process overwrites the existing

PATHMON configuration file with the current configuration information.

For a cool start, specifies to use the existing PATHMON configuration file to restart

the subsystem. Any unexpected PATHMON process name in the PATHCTL file is

ignored.

ZSTART

specifies whether to perform a cool start or a cold start. The valid values are:

ZPWY-VAL-COOL Cool start the Pathway subsystem.

ZPWY-VAL-COLD Cold start the Pathway subsystem. The

ZPWY-DDL-DEF-PATHWAY token must be present for a cold

start.

This table shows the valid combinations of ZIGNORE and ZSTART and the

corresponding PATHCOM commands:

Corresponding PATHCOM Command

ZPWY-MAP-DEF-PATHWAY

TokenZSTART ValuesZIGNORE Values

START PATHWAY COLDRequiredCOLDNO

START PATHWAY COLD!RequiredCOLDYES

START PATHWAY COOLOptionalCOOLNO

START PATHWAY COOL!OptionalCOOLYES

ZPWY-MAP-PAR-STATS-SCLM

This token specifies whether the counters used for statistics measurements be set back to zero after

the statistics data is returned.

def ZPWY-DDL-PAR-STATS-SCLM.

token-type ZPWY-DDL-YES-NO.

02 ZRESETSTATS

end.

ZRESETSTATS

indicates whether to reset the statistics counters to zero. The valid values are:

ZPWY-VAL-NO Counters are not reset to 0.

ZPWY-VAL-YES Counters are reset to 0.

If you do not assign a value to this field, then the default is ZPWY-VAL-NO.

ZPWY-MAP-PAR-STATS-SCLM 99