TS/MP Pathsend and Server Programming Manual (H06.05+, J06.03+)
Other Manuals of Interest
Other manuals that might be of interest to readers of this manual include these:
• Availability Guide for Application Design. This manual describes the features of NonStop
systems that support the availability of applications. This manual includes a section about
application availability in the Pathway transaction processing environment.
• Guardian Programmer’s Guide. This guide provides information about programming in the
Guardian environment, including use of the Guardian procedure calls. It is useful to
programmers who are writing Pathway servers, especially if they are writing them in C, C++,
TAL, or pTAL.
New and Changed Information
Changes to the 542660-007 manual:
• Added “SERVERCLASS_DIALOG_BEGIN64_ Procedure” (page 82).
• Added “SERVERCLASS_DIALOG_SEND64_ Procedure” (page 89).
• Added “SERVERCLASS_SEND64_ Procedure” (page 95).
• Added “SERVERCLASS_SEND_INFO64_ Procedure” (page 102).
• Added a new “NOTE” (page 101) to the section “Retaining Concurrent Sends Limit” (page 101).
Changes to the 542660-006 manual:
• Added product version 2.0 and 2.1 to the title page.
• Updated the description of “context-sensitive server” (page 71).
• Changed the following parameters of the “SERVERCLASS_SENDL_ procedure” (page 98) and
“SERVERCLASS_SENDL_ procedure” (page 99):
◦ write-buffer to message-buffer
◦ read-buffer to request-buffer
• Updated the Pathsend requesters limits in Table 6 (page 128).
Changes to the H06.19/J06.08 Manual
• Added “Retaining Concurrent Sends Limit” (page 101).
Changes to the 542660-004 Manual
• Added ACS Restart Errors in:
“Basic Pathsend Programming” (page 54)◦
◦ “Context-Sensitive Pathsend Programming” (page 60)
• Added “ACS Subsystem Failures” (page 63).
• Added “Handling ACS Subsystem Failures” (page 74).
• Updated recovery of “947: FEScRoutConnect” (page 127) Pathsend error.
• Added a note in “TS/MP Limits for Pathsend Requesters” (page 128).
Changes to the H06.18/J06.07 manual
• Added a new Pathsend procedure call, SERVERCLASS_SENDL_, in the Table 5 (page 75).
• Added “SERVERCLASS_SENDL_ Procedure” (page 98).
10