TS/MP Pathsend and Server Programming Manual (H06.05+, J06.03+)

• Added a reference to Server Timeout in:
“SERVERCLASS_DIALOG_BEGIN_ Procedure” (page 81)◦
◦ “SERVERCLASS_DIALOG_SEND_ Procedure” (page 88)
◦ “SERVERCLASS_SEND_ Procedure” (page 94)
◦ “SERVERCLASS_SENDL_ Procedure” (page 100)
• Updated the description of “Server Timeout” (page 106).
• Updated “limits for server-class send operations” (page 128).
Changes in the H06.14/J06.03 Manual
• Supported release statements have been updated to include J-series RVUs.
• Added Table 1 (page 16).
• Updated the description of pathmon-process-name:length under
“SERVERCLASS_DIALOG_BEGIN_ Procedure” (page 80).
• Added a note on, “NOTE” (page 82) and “NOTE” (page 94), specifying that information on
setting flag 9 for TS/MP 2.3 can be found in Bridging Pathsend API into Pathway Domain
section.
• Updated the description of pathmon-process-name under
“SERVERCLASS_SEND_Procedure” (page 93).
• Added information on “Error no. 918.40” (page 108).
• Added a section on “Bridging Pathsend API into Pathway Domain” (page 108).
• Updated the description of Pathsend Error “928: FEScOutstandingSend” (page 125).
• Updated the description of Pathsend Error “931: FEScDialogEnded” (page 126).
Organization of this manual
DescriptionSection
Contains an overview of Pathway application programming, with emphasis
on Pathsend requesters and Pathway servers.
Section 1, “Introduction to Pathway
Application Programming” (page 16)
Provides information about Pathway application design, with emphasis on
Pathsend requesters and Pathway servers.
Section 2, “Designing Your Application”
(page 29)
Describes how to write requesters that use the Pathsend procedure calls.Section 3, “Writing Pathsend Requesters”
(page 51)
Describes how to write Pathway servers.Section 4, “Writing Pathway Servers”
(page 62)
Provides the syntax, parameter descriptions, and coding considerations for
the Pathsend procedure calls.
Section 5, “Pathsend Procedure Call
Reference” (page 75)
Provides cause, effect, and recovery information for all Pathsend error codes.Section 6, “Pathsend Errors” (page 109)
Lists the Pathsend errors generated by ACS subsystem processes.Section 7, “Pathsend Errors for ACS
Subsystem” (page 120)
Summarizes the limits that apply to the Pathsend programming environment.Appendix A, “TS/MP Limits for Pathsend
Requesters” (page 128)
Provides source code for an example Pathsend requester and an example
Pathway server.
Appendix B,“Examples” (page 129)
Organization of this manual 11