TS/MP Pathsend and Server Programming Manual (H06.05+, J06.03+)

Cause. The buffer length in the request-len or maximum-reply-len parameter for a call
to SERVERCLASS_SEND_, SERVERCLASS_DIALOG_BEGIN_, or SERVERCLASS_DIALOG_SEND_
is invalid. This is a programming error.
Typical file-system error: 21 (FEBadCount)
Effect. The send initiation fails with an error.
Recovery. Check the buffer lengths allowed for the request-len and maximum-reply-len
parameters in the syntax description for the procedure call, and specify the correct buffer lengths.
912
FEScParameterBoundsError
Cause. The address specified by a reference parameter is out of bounds, or the caller supplied a
reference parameter that is an extended address but does not have an extended segment in use.
This is a programming error.
Effect. The send initiation fails with an error.
Recovery. Correct the programming error.
913
FEScServerClassFrozen
Cause. The server class the process tried to send to is frozen.
Typical file-system error: 0 (FEOK)
Effect. The SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_ call is completed with an
error. The message is not sent to the server class.
Recovery. Resend after the system manager or operator has thawed the server class.
914
FEScUnknownServerClass
Cause. The server class is not configured through the specified PATHMON process. The program
has specified an incorrect server-class name or specified the wrong PATHMON process.
Typical file-system error: 0 (FEOK)
Effect. The SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_ call is completed with an
error. The message is not sent to the server class.
Recovery. Check the server-class name and the PATHMON process name. Or check if the server
class has been configured yet (the PATHMON-controlled objects could be in the process of being
cold started).
915
FEScPathmonShutDown
Cause. The send operation has been denied for one of these reasons:
• The PATHMON process for the server class is shutting down.
• A timeout occurred on an I/O operation to a server in debug mode.
Typical file-system error: 0 (FEOK)
Descriptions of Pathsend Errors 113