TS/MP Pathsend and Server Programming Manual (H06.05+, J06.03+)

(FEContinue) indicates that the call was successful and the server is ready for the next message in the dialog.

233

(FESCErr) indicates that an error occurred. You can call the SERVERCLASS_SEND_INFO_ procedure to get more

detailed information about the error.

outputdialog-id

INT:ref:EXT(32):1

returns an identifier that can be used for subsequent operations on this dialog.

This parameter is required.

input:inputpathmon-process-name:length

STRING:ref:EXT:*, INT:value

contains the external Guardian process name of the PATHMON process controlling the server class

(for example, $PM or \AB.$PMN). For TS/MP 2.3 and later versions, it is the pathway domain

name, whose member pathmons have the server class configured under them. For more details on

TS/MP 2.3 and later versions, see the TS/MP Release Supplement Manual.

The process name portion can have up to five characters after the dollar sign ($) if it is a local process

name and up to four characters after the dollar sign if it is a process on a remote system. The name

cannot include an optional first or second name qualifier, must be left justified in the buffer, and can

contain trailing blanks.

The integer value is the byte length of the pathmon-process-name string. This value can range from

2 through 15.

This parameter is required.

input:inputserver-class-name:length

STRING:ref:EXT:*, INT:value

contains the name of the server class to send to (for example, EMP-SERVER). This name must conform

to the Pathway server-class naming rules, must be left justified in the buffer, and can contain trailing

blanks. This server-class name, along with the

pathmon-process-name

, uniquely identifies a server class.

The integer value is the byte length of the server-class-name string. This value can range from 1

through 15.

This parameter is required.

input, outputmessage-buffer

STRING:ref:EXT:*

contains the message to send to the server class. On successful completion of the send operation,

message-buffer contains the reply from the server class.

This parameter is required.

inputrequest-len

INT:value

is the byte length of the data contained in message-buffer. The range of acceptable values is 0

through 32767 bytes.

80 Pathsend Procedure Call Reference