TS/MP Pathsend and Server Programming Manual (H06.05+, J06.03+)

ManualsBrandsHP ManualsServerHP Integrity NonStop J-Series

For information about informational, warning, and error messages, see:

• Guardian Procedure Errors and Messages Manual. This manual describes the Guardian

messages for NonStop systems that use the HP NonStop Kernel operating system. The manual

covers various types of error codes and error lists associated with Guardian procedure calls

and also the interprocess messages sent to application programs by the operating system and

the command interpreter.

• Operator Messages Manual. This manual describes system messages. For each message the

manual provides an explanation of the cause, a discussion of the effect on the system, and

suggestions for corrective action. The “PATHWAY Messages” section describes the operator

messages generated by the PATHMON environment.

For information about managing the PATHMON environment in which your Pathway applications

run, you might want to read this manual:

• NonStop TS/MP System Management Manual. This manual describes how to start, configure,

and manage a PATHMON environment. This manual also includes information about monitoring

and adjusting your PATHMON environment to optimize performance, suggestions for

diagnosing and fixing problems, and manageability guidelines such as how to start objects

in parallel to improve performance. It also describes the commands for configuring, starting,

and managing a PATHMON environment.

For information about related NonStop products, see:

• Introduction to NonStop Transaction Processing. This manual describes the architecture,

components, and benefits of transaction processing products of HP, including TS/MP,

Pathway/iTS, and related products such as the NonStop Tuxedo system.

• HP NonStop Transaction Management Facility (TMF) Application Programmer’s Guide. This

guide provides information about programming for the TMF subsystem, including use of the

TMF procedure calls. It is useful to programmers who are writing Pathsend requesters and

Pathway servers, especially if they are writing them in C, C++, TAL, or pTAL.

• NonStop TUXEDO System Application Development Guide. This guide provides information

about writing NonStop Tuxedo applications. Pathsend requesters can interoperate with NonStop

Tuxedo applications either directly by using the NonStop Tuxedo Application Transaction

Monitor Interface (ATMI) functions, or indirectly by using the Pathway translation server for

the NonStop Tuxedo system.

• NonStop TUXEDO System Pathway Translation Servers Manual. This manual provides

information about writing Pathsend and SCREEN COBOL requesters that interoperate with

NonStop Tuxedo servers by using the Pathway translation server, and information about writing

Pathway servers that interoperate with NonStop Tuxedo requesters (clients or servers acting

as clients) by using the NonStop Tuxedo to Pathway translation server. It also provides

configuration information for the two translation servers.

Other Manuals in the Manual Set

In addition to the TS/MP and Pathway/iTS manuals shown in Figure 1 (page 8), the manual set

for these products includes these manuals:

• Pathway/iTS System Management Manual. This manual describes how to start, configure,

and manage Pathway/iTS objects (TCPs, terminal objects, SCREEN COBOL programs, and

tell messages) in a PATHMON environment. It also describes the commands for configuring,

starting, and managing Pathway/iTS objects.

• NonStop TS/MP Management Programming Manual. This manual describes the management

programming interface to the Pathway subsystem, including programmatic commands and

related objects, event messages, and error lists.

• Pathway/iTS Management Programming Manual. This manual describes the error lists and

event messages issued by the management programming interface to the Pathway subsystem.