G06.25 ReadMe

ManualsBrandsHP ManualsServerHP Integrity NonStop Release and Migration

G06.25 README

Protected as an unpublished work.

January 2005

The computer program listings, specifications, and documentation

herein are the property of Hewlett-Packard Development Company, L.P.

or a third-party supplier and shall not be reproduced, copied,

disclosed, or used in whole or in part for any reason without the

prior express written permission of Hewlett-Packard Development

Company, L.P.

This README (SUT) file contains information that was not available

at the time manuals, softdocs, and other release materials were

produced. This file contains only information pertinent to the

G06.25 Release Version Update (RVU).

See the online NonStop Technical Library (NTL) support collection for

the latest version of the README file.

----------------------------------------------------------------------

G06.25 README file

----------------------------------------------------------------------

o ATP6100 (T9337)

Solution 10-031125-1547

When a Setmode 13 is issued by the application with the second

parameter absent or set to 0 (both of which are incorrect), the

application read request will not complete and will hang.

Recovery

None.

Workaround

Change the application to ensure that the second parameter of

Setmode 13 is passed correctly. The second parameter should be the

configured END OF TEXT character.

o EMS BASE (T9631)

Solution 10-030812-8691

When the primary process stops/aborts and the backup process takes

over, the alternate key files (ZZSKnnnn) of the hardware logger

($ZLOG) are changed into ZZEKnnn.

Recovery

Stop $ZLOG from the TACL prompt (the AUTORESTART value should be

greater than 0). Being a generic process, $ZLOG will automatically

restart and behave normally. Commands to modify the autorestart

value are as follows:

>SCF ABORT PROC $ZZKRN.#TSM-ZLOG

>SCF INFO PROC $ZZKRN.#TSM-ZLOG,DETAIL

>ACF ALTER PROC $ZZKRN.#TSM-ZLOG,AUTORESTART ;

where n is an integer from 0 to 10.

>scf start proc $zzkrn.#tsm-zlog

Note that if the AUTORESTART value is equal to 0, the user must

Page

Summary of content (10 pages)

PAGE 1
Page 1 of 10 G06.25 README Copyright (C) 2005 Hewlett-Packard Development Company, L.P. Protected as an unpublished work. All rights reserved. January 2005 The computer program listings, specifications, and documentation herein are the property of Hewlett-Packard Development Company, L.P. or a third-party supplier and shall not be reproduced, copied, disclosed, or used in whole or in part for any reason without the prior express written permission of Hewlett-Packard Development Company, L.P.
PAGE 2
Page 2 of 10 restart $ZLOG manually, using the above SCF START command. Workaround None. o ENSCRIBE File System (T9055) Solution 10-041119-1974 A %5100 halt will occur when a call to FILE_GETLOCKINFO_ is made with the MAX-PARTICIPANTS value greater than 1268. Recovery Reload the processor. Workaround Specify the MAX-PARTICIPANTS with a value less than 1268. o FUP (T6553) Solution 10-041123-2122 FUP displays TYPE 0, LENGTH 0 for the primary key columns of a SQLMX table.
PAGE 3
Page 3 of 10 Recovery None. However, Ignore the error message. The command wil have successfully completed even though it generates this error. Workaround None. o Measure (T9086) Solution 10-040810-8690 The Measfh process will abend with Trap %2 if primary and secondary extents are specified as 1024 or greater. Recovery None. Workaround Start a measurement with primary and secondary extents of less than 1024.
PAGE 4
Page 4 of 10 Note that the physical view, attribute view and over view panes function normally. Recovery None. Workaround Open a New OSM Service Connection without selecting the "Loading Tree View" message on the OSM Service Connection. Solution 10-040726-8180 OSM requires that the named process $ZNET be running as the default SCP process. The name $ZNET is required. If $ZNET is not running, OSM will eventually present incorrect information and may fail for actions requiring SCP.
PAGE 5
Page 5 of 10 o OSM Web-Based Suite (T2751) Solution 10-040813-8808 When an FCSA is inserted or replaced, the adapter might not be displayed in Physical view (in the View pane). Recovery In the Tree pane, click on an object in another group, then back to the group containing the FCSA, the FCSA should now appear in the Physical view. Workaround None.
PAGE 6
Page 6 of 10 4. The Primary of PAM process halts. the Primary of SNAX Line Handler process triggers a self asserted halt with code %47277. Recovery Bring up the processors over which the primary of the PAM and SNAX Line Handler were running, and reconfigure PAM and SNAX lines using SCF commands. Workaround None. o SQL/MP for TNS/R C (T0252) Solution 10-040409-4920 In an OSS environment, compilation of C programs embedded with SQL statements might terminate abruptly.
PAGE 7
Page 7 of 10 Workaround None. o TCP/IPv6 Subsystem (T1265) Solution 10-040212-3224 The SCF command: ALTER MON *,ARPTIMER-REFRESHED ON fails to set the ARPTIMER-REFRESHED parameter. Recovery None. Workaround None. o TELSRV (T9553) Solution 10-141104-1466 Under the following conditions: 1. A service is configured with the PROGRAM attribute set to a program file existing on a remote system and a window is associated with the service 2.
PAGE 8
Page 8 of 10 Solution 10-031009-0267 If the underlying transport agent (TCPSAM) is brought down while TELSRV has at least one TELNET session established through the transport agent, the TELSRV process will abend with the following EMS message: TELNET NO LONGER OPERATIONAL: REPLYX FAILED Recovery Restart the TELSRV process. Workaround None. o TFDS (T6523) Solution 10-041022-1000 TFDS fails to collect a good dump even if there are multiple CPU failures of the same kind.
PAGE 9
Page 9 of 10 None. Errata ---------------------------------------------------------------------- --G06.25 Software Installation and Upgrade Guide update-On page 17-4 in the G06.25 Software Installation and Upgrade Guide, 529430.001, the text for step 4: 4. a. > b. > If needed, run the DSM/SCM FALLBACK macro: Stop DSM/SCM if it is not already in the stopped state: RUN STOPSCM Run the FALLBACK macro: RUN FALLBACK should read: 4. a. > b.
PAGE 10
Page 10 of 10 feature will cause SETMODE to return CCL and error 2 (invalid operation). An application can verify that the SETMODE has been accepted if SETMODE returns CCE. Applications should tolerate a CCL return in order to continue functioning on old and new DP2 versions. The new SETMODE is intended to improve file close performance in specific instances.