G06.27 ReadMe

o TCP/IP FTP (T9552)
Solution 10-050616-8853
FTP API call FTPlist() returns error 403 to the application, when
a very long list of files is being retrieved from a remote system.
Recovery
None.
Workaround
Use FTPList() function calls multiple times to retrieve the files.
For example, pass the "pattern" argument of the FTPList() as "a*"
to retrieve the list of files starting from "A" or "B" and so on.
o TELSERV (T9553)
Solution 10-050617-8872
Wrong "_DEFAULTS" defines were inherited when an alias user is
logged in through OSS service. This happens under these
conditions:
- Configure an OSH service on a Telserv process.
- Select the configured OSH service after connecting to Telserv
process.
- Log in as an alias for the existing user (Alias should have
DEFAULT VOLUME other than that of the user.)
- Issue the command INFO_DEFINE =_DEFAULTS at the OSH prompt.
Recovery
None.
Workaround
Either configure the same Guardian Default Volume for the User
and all its alias(es), or go to an OSH prompt from TACL.
Errata
----------------------------------------------------------------------
--Printing Softdocs for the G06.27 RVU--
Most softdocs for the G06.27 RVU do not have embedded
TGAL-formatting commands. If you need to print softdocs directly
from the SUT, use the following TGAL command:
TGAL/IN infile, OUT outfile/ NEW;POFF 8;OUTLEN 80
For those softdocs that do have embedded TGAL-formatting commands,
the aforementioned command can be used as well.
Page
5
of
5