G06.30 ReadMe

G06.30 README
Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
Protected as an unpublished work.
All rights reserved.
The computer program listings, specifications, and documentation
herein are the property of Hewlett-Packard Development Company, L.P.
or a third-party supplier and shall not be reproduced, copied,
disclosed, or used in whole or in part for any reason without the
prior express written permission of Hewlett-Packard Development
Company, L.P.
This README (SUT) file contains information that was not available
at the time manuals, softdocs, and other release materials were
produced. This file contains only information pertinent to the
G06.30 Release Version Update (RVU).
----------------------------------------------------------------------
G06.30 README file
----------------------------------------------------------------------
o OSS NAME SERVER LIMITS RELIEF
The default values of the INODECACHE and LINKCACHE attributes of
the OSS Name Server are changed from 4096 to 64,000.
o TCP/IPv6 ENHANCEMENT
A new option is provided to cause XDCMPReconfigure to deny requests
from a remote host. To enable the feature, you must explicitly
enable the ICMP-FILTER-PACKETS parameter through SCF.
For migration and fallback considerations, see the G06.30
Software Installation and Upgrade Guide and the G06.30 Release
Version Update Compendium.
o NETBATCH ENHANCEMENT
NetBatch increases the WAITON limit for jobs from 20 to 50. You
can now configure a job with a maximum of 50 master jobs. Also,
the scheduler now assigns job numbers consecutively in the range
1 through 32767. Previously, job numbers were assigned
consecutively in the range 1 through 9999.
o ODBC/MX ENHANCEMENT
Error 21035 in the EMS logs have additional catalog and schema
information along with the ODBC/MX resource statistics
information.
o OBSOLETE PRODUCTS
The following four products are obsolete and have been removed
from the G06.30 SUT:
o T9683 (NSX)
o T8975 (OMF)
o T8484 (NSXGEM)
o T5870 (OMFGUI)
Page
1
of
1