H06.03 ReadMe

1.2 IPs Available for H06.03 and IPs That Are SUT Based

---------------------------------------------------------

For H06.03, some products previously delivered as Independent

Products (IPs) are now delivered as SUT-based products. For

more information on IPs available for use with H06.03 and those that

are now SUT-based, please see the H06.03 Software Installation and

Upgrade Guide and the H06.03 Release Version Update Compendium.

1.3 Printing Sofdocs for the H06.03 RVU

-----------------------------------------

Most softdocs for the H06.03 RVU do not have embedded

TGAL-formatting commands. If you need to print softdocs directly from

the SUT, use the following TGAL command:

TGAL/IN infile, OUT outfile/ NEW;POFF 8;OUTLEN 80

For those softdocs that do have embedded TGAL-formatting commands,

the aforementioned command can be used as well.

2.0 INSTALLING THE H06.03 RVU

2.1 ServerNet Clusters

------------------------

ServerNet clustering is supported for H06.03. However, NonStop

S-series nodes require installation of SPR T0294 AAP or greater

before connecting Integrity NonStop NS-series nodes to a cluster.

See the H06.03 Software Installation and Upgrade Guide for details.

2.2 Migrating HP NonStop S-Series ServerNet Adapters

------------------------------------------------------

Before connecting a NonStop S-series system to an Integrity NonStop

NS-series system through legacy I/O, you must first update the

firmware for both the S-series Gigabit 4-port ServerNet adapter

(G4SA) and Fibre-channel ServerNet adapter (FCSA). Firmware for

both the G4SA and FCSA adapters used for S-series systems is not

initially compatible with NS-series systems. See the H06.03

Software Installation and Upgrade Guide for details on firmware

versions.

If you have a NonStop S-Series system that is connected to the

Integrity NonStop NS-series system via Expand or ServerNet Clusters,

you do not need to initially update the G4SA or FCSA firmware.

2.3 DSM/SCM Host and Targets

------------------------------

A new client (Planner Interface) and DSM/SCM T6031G01^ABP SPR is

available for NonStop S-series servers and G-series systems. This

new client and server SPR is capable of building a TNS/E target on

a TNS/R host. See your HP service provider or Scout for

availability. See the DSM/SCM User's Guide for information on

Page