H06.04 ReadMe

H06.04 README

Protected as an unpublished work.

The computer program listings, specifications, and documentation

herein are the property of Hewlett-Packard Development Company, L.P.

or a third-party supplier and shall not be reproduced, copied,

disclosed, or used in whole or in part for any reason without the

prior express written permission of Hewlett-Packard Development

Company, L.P.

This README (SUT) file contains information that was not available

at the time manuals, softdocs, and other release materials were

produced. This file contains only information pertinent to the

H06.04 Release Version Update (RVU).

See the online NonStop Technical Library (NTL) support collection for

the latest version of the README file.

----------------------------------------------------------------------

H06.04 README file

----------------------------------------------------------------------

o NonStop Kernel (T9050)

Solution 10-051025-2204

SYMPTOMS:

Processor halts with halt code %21207 because XIO returns

stale handle.

CONDITIONS:

Unknown

LIKELIHOOD:

Undetermined

DIRECT IMPACT:

Processor halts with halt code %21207

SIDE-EFFECTS:

None

WORKAROUND:

Reload the processor.

RECOVERY:

Reload the processor.

o NSK XIO (T8374)

Solution 10-051019-2109

SYMPTOMS:

Processor halt %102400 from FLEXPOOL_GET_ occurs as a result of

Measure calling XIO_MS_SET_XPTR64_ ().

CONDITIONS:

Page

PAGE 1
Page 1 of 3 H06.04 README Copyright (C) 2005 Hewlett-Packard Development Company, L.P. Protected as an unpublished work. All rights reserved. The computer program listings, specifications, and documentation herein are the property of Hewlett-Packard Development Company, L.P. or a third-party supplier and shall not be reproduced, copied, disclosed, or used in whole or in part for any reason without the prior express written permission of Hewlett-Packard Development Company, L.P.
PAGE 2
Page 2 of 3 This problem might occur when running Measure. LIKELIHOOD: Likely under heavy usage. DIRECT IMPACT: Processor halts SIDE-EFFECTS: None WORKAROUND: None RECOVERY: Reload the processor. o TAPEPROCESS (T0021) Solution 10-050817-0676 SYMPTOMS: The primary processor of TAPEPROCESS halts with a %102200 halt code. CONDITIONS: The tape drive is connected to the NonStop NS-series system through an IOMF2 cabinet. LIKELIHOOD: Likely DIRECT IMPACT: Loss of a single processor.
PAGE 3
Page 3 of 3 twice in the program. The condition-name does not have to be associated with the onecharacter data item, or the group (if any) containing that data item. The THROUGH form of a VALUE clause would be a typical way to use multiple values in a level-88 condition-name entry, but THROUGH is not required to trigger the problem. LIKELIHOOD: Unlikely DIRECT IMPACT: The compilation fails. SIDE-EFFECTS: None WORKAROUND: 1) Change the description of the data item from "PIC X OCCURS n TIMES" to "PIC X(n)".