H06.04 Software Installation and Upgrade Guide

Overview of Installing the H06.04 RVU
H06.04 Software Installation and Upgrade Guide—541607-001
1-5
OSM Client-Based Components
OSM Client-Based Components
Like other system console software, the OSM client-based components are dual-
threaded; that is, they support both G-Series and H-series RVUs. For H06.04, the
OSM SPRs are:
•
T0632 G06 AAO (OSM Notification Director)
•
T0633 G06 AAM (OSM Low-Level Link)
•
T0634 G06 AAJ (OSM Console Tools)
Highlights include:
While dual-threaded, the OSM Low-Level Link has functionality specific to modular I/O
and Integrity NonStop NS-series systems, including:
•
A new System Load dialog box, unique to NS-series systems, provides the ability
to:
•
Load the system from alternate system load configurations (using either SCSI
or FC disks) created through the OSM Service Connection. After a
configuration is saved, you can load the system using mirrored disks without
reviving.
•
Exclude the Processor Element (PE) for a particular Blade Element from a
reload operation, so you can dump that PE before reintegration, while getting
the rest of the system running as quickly as possible.
•
Configure Module action, used to configure IOAM and processor switch modules
•
Power On System action (NS-series systems only)
•
Reset action for FCSA, G4SA, and Processor Switch plug-in card (PIC)
OSM Notification Director, T0632 G06 AAO, includes support for Secure Sockets Layer
(SSL), which is required for HP SIM support. To enable SSL, see the OSM Migration
Guide.
For more information on OSM client applications, see the OSM Migration Guide or the
online help available from within each application. To upgrade an existing system
console to the latest console software, see the NonStop System Console Installer
Guide.
Using DSM/SCM for the H06.04 RVU
•
DSM/SCM for the H06.04 RVU
•
Public DLLs and DSM/SCM
•
DSM/SCM and OSS
•
Upgrading the DSM/SCM Client (Planner Interface) and the T6031H01 PVU
•
Installing a New H06.04 SUT Using DSM/SCM