H06.04 Software Installation and Upgrade Guide

Overview of Installing the H06.04 RVU
H06.04 Software Installation and Upgrade Guide—541607-001
1-11
Managing Maintenance Entity Firmware for Processor
Switch and I/O Adapter Module (IOAM)
4. In the Actions dialog box, select ME Firmware Update and click Perform Action.
5. Monitor the update.
6. Repeat for the processor switch on the other Internal ServerNet Fabric.
To use the OSM Service Connection to check and (if necessary) update the ME
firmware for each IOAM:
1. Locate the ServerNet Switch Board on one IOAM (in the tree pane, select System
> Group > IOAM Enclosure > IOAM > ServerNet Switch Board).
2. Click to select the ServerNet Switch Board object, then check the ME Firmware
attributes in the Attributes tab. If downrev, follow the rest of this procedure to
update the ME firmware.
3. Right-click the ServerNet Switch Board object and select Actions.
4. In the Actions dialog box, select ME Firmware Update and click Perform Action.
5. Monitor the update.
6. Repeat for the processor switch on the other Internal ServerNet Fabric.
You can also check and update ME firmware using the OSM Low-Level Link. For more
information, see the OSM Low-Level Link online help.
You should not use the Multi-Resource Actions dialog (in the OSM Service
Connection) to update ME firmware or ME FPGA simultaneously on both fabrics, or a
system outage might occur.
Updating ME FPGA
Table 1-2 shows the current ME FPGA information for both processor switches and
IOAMs:
Use the OSM Service Connection to check and (if necessary) update ME FPGA just as
you did when Updating ME Firmware for both processor switches and IOAMs, except
update the ME FPGA firmware.
Table 1-2. Maintenance Entity (ME) FPGA
Product
Number Description Host FRU
Disk File
Name
Default
Location
Related
Information
T0437A01^AAA Maintenance
Entity (ME)
FPGA
ServerNet
Switch Board
(IOAM and
processor
switch)
SAM0437 SYSnn OSM online help