H06.05 ReadMe

ManualsBrandsHP ManualsServerHP Integrity NonStop Release and Migration

H06.05 README

Protected as an unpublished work.

The computer program listings, specifications, and documentation

herein are the property of Hewlett-Packard Development Company, L.P.

or a third-party supplier and shall not be reproduced, copied,

disclosed, or used in whole or in part for any reason without the

prior express written permission of Hewlett-Packard Development

Company, L.P.

This README (SUT) file contains information that was not available

at the time manuals, softdocs, and other release materials were

produced. This file contains only information pertinent to the

H06.05 Release Version Update (RVU).

----------------------------------------------------------------------

H06.05 README file

----------------------------------------------------------------------

o CMAP (T0777)

Solution 10-060213-4429

SYMPTOMS:

The reload fails.

CONDITIONS:

This problem might occur when the diver/reload of processors is

under heavy stress.

LIKELIHOOD:

Likely to occur under heavy stress and the processors are

diver/reloaded.

DIRECT IMPACT:

The reload fails.

SIDE-EFFECTS:

None.

WORKAROUND / RECOVERY:

Diver/reload a processor which is the highest numbered LID in a

complex.

o Complex Manager AP (CMAP, T0777)

Solution 10-060203-4255

SYMPTOMS:

OSM alarm is not cleared after a blade reset.

CONDITIONS:

This problem might occur when a blade is reset.

LIKELIHOOD:

Likely, when a blade is reset.

DIRECT IMPACT:

Page

Summary of content (6 pages)

PAGE 1
Page 1 of 6 H06.05 README Copyright (C) 2006 Hewlett-Packard Development Company, L.P. Protected as an unpublished work. All rights reserved. The computer program listings, specifications, and documentation herein are the property of Hewlett-Packard Development Company, L.P. or a third-party supplier and shall not be reproduced, copied, disclosed, or used in whole or in part for any reason without the prior express written permission of Hewlett-Packard Development Company, L.P.
PAGE 2
Page 2 of 6 None SIDE-EFFECTS: None WORKAROUND / RECOVERY: Perform the cable check action as suggested in the alarm. o Complex Manager AP (CMAP, T0777) Solution 10-060206-4279 SYMPTOMS: Processor halt occurs with haltcode %5570. CONDITIONS: This problem might occur when two strands are miscabled to LSUs on a running system. LIKELIHOOD: Very likely, when more than one strand is miscabled. DIRECT IMPACT: Processor halt SIDE-EFFECTS: None. WORKAROUND: Correct the cabling problem and reload the processor.
PAGE 3
Page 3 of 6 o LD NATIVE PIC LINKER (T0429) Solution 10-040311-4030 SYMPTOMS: Linking fails because it links to a wrong file. CONDITIONS: The problem occurs when the file is specified without its (relative or absolute) path and another file with the same first 8 characters exists in the cold load SYSnn volume. LIKELIHOOD: Rare, because a file with a name that has the same first 8 characters has to exist on the SYSnn subvolume for the problem to occur. DIRECT IMPACT: The linking step fails.
PAGE 4
Page 4 of 6 The OSS Shell hangs and does not return the shell prompt. CONDITIONS: This problem might occur only if ALL the conditions listed below are met: 1. The 'su' utility is used with the -f option. 2. A command or a script is passed to 'su' using the -c option. 3. The switchuser is successful. 4. After the switchuser, a command expecting standard input from the keyboard is executed. 5. All the above mentioned steps happen in a shell script.
PAGE 5
Page 5 of 6 CONDITIONS: This problem might occur when you use PMPROJECT CONVERT to convert projects from D30/D40 to H01. LIKELIHOOD: Certain. DIRECT IMPACT: Unable to convert D30/D40 project to H01. SIDE-EFFECTS: None. WORKAROUND: Use the command "PMPROJECT/release H01 /IMPORT FROM " to migrate to the new version. RECOVERY: None.
PAGE 6
Page 6 of 6 DIRECT IMPACT: None SIDE-EFFECTS: None WORKAROUND: Copy the file ZTACSEGF from subvolume ZSPIDEF to subvolume ZSPISEGF. RECOVERY: None o Backup Restore 2 (T2721, T2722, T2749, T2750, and T2826) Starting with H06.05, these products are replaced with T0744, Backup Restore 2: - T2721, T2722, T2749, T2750, T2826, BRCOM BR2 TAPE SERVICES BR2 DMA & CSP BR2 DATA SERVICE BR2 OSS Agent T2721, T2722, T2749, and T2750 might appear in the DSM/SCM configuration when you migrate to H06.05.