H06.05 Software Installation and Upgrade Guide

Resuming Normal Operations
H06.05 Software Installation and Upgrade Guide—541762-003
7-5
Configure OSS
58> type portconf
#
# This file tells the listner program which ports to
# listen to, and what programs to run
# Telnet is directly, and does not use the listner's
# services.
# To run the listner use:
# $system.ztcpip.listner / name.../ [config-file-name]
# where config-file-name is this file.
#
ftp $system.ztcpip.ftpserv
finger $system.ztcpip.fingserv
$system.ztcpip.echoserv
phiwsock $tdsv.zdsmscm.pdpexe
Applications use the SERVICES file to retrieve the service port numbers and service
names. If you copied files as documented in Step 1, check that the last lines of the
SERVICES file have an entry similar to:
phiwsock 1089/tcp #DSM/SCM Planner Interface
For DSM/SCM, the port number is user-definable. The setup default is 1089. In the
ZDSMSCM subvolume, check the INITSTAT file for the recently configured TCP/IP port
number. INITSTAT is created by DSM/SCM when INITENV is run.
Configure OSS
See the Open System Services Management and Operations Guide and the Open
System Services Installation Guide for information about updating and maintaining
OSS database files.
See the Open System Services Management and Operations Guide and the Open
System Services Installation Guide for information about updating and maintaining
OSS database files. See the IUG for new OSS features and for a summary of
migration or installation issues.
Install Specific OSS Files Using COPYOSS or PINSTALL
For those products that are not managed by DSM/SCM, you must install them using
COPYOSS or PINSTALL or both.
•
If any OSS files are managed by DSM/SCM, use PINSTALL on the remaining pax
archives. See the OSS Management and Operations Guide for a description of
PINSTALL use or the pinstall(1) reference page in the OSS Shell and Utilities
Reference Manual.
•
If no OSS files are managed by DSM/SCM, use COPYOSS for all of the OSS pax
archives in the ZOSSUTL subvolume. See the OSS Management and Operations
Guide for a description of COPYOSS use or the copyoss(8) reference page in
the OSS Shell and Utilities Reference Manual. Then use PINSTALL to install any
pax archives in other subvolumes. See the OSS Management and Operations