H06.05 Software Installation and Upgrade Guide

Loading the Previous RVU and Resuming Normal
Operations
H06.05 Software Installation and Upgrade Guide—541762-003
10-6
Reverting to H06.04 NonStop Blade Complex
Firmware
3. Load (coldload) the system with the H06.04 RVU.
c. Update NonStop Blade Complex (NSBC) firmware on the other flash, as
follows:
1. Using the OSM Service Connection and the Blade Complex Firmware
Update guided procedure, complete the dialog boxes and update the
shadow firmware on each NonStop Blade Element.
2. Using the Switch Blade Element Firmware Images dialog box, select NO.
3. Repeat Steps 1and 2 for the other NonStop Blade Complexes.
Note. In the Select Firmware Modules for shadow image dialog box, select all
parts that are noted as Up-Rev.
Note. Update all NonStop Blade Elements in the complex at this time.