H06.05 Software Installation and Upgrade Guide

Using DSM/SCM to Install SPRs

H06.05 Software Installation and Upgrade Guide—541762-003

A-3

Determine the Current SYSnn

3. Save the current configuration by using a unique file name. At the SCF prompt,

enter:

-> SAVE CONFIGURATION xx.yy

where xx.yy is a number from 0.0 through 99.99.

This example saves the current system configuration to the file

$SYSTEM.ZSYSCONF.CONF1101:

-> SAVE CONFIGURATION 11.1

The configuration file $SYSTEM.ZSYSCONF.CONF1101 has been created.

If you specify a configuration file that already exists, SCF asks you if you want to

replace it. If you specify that you do not want to replace the existing file, SCF does not

overwrite the file. You must enter another SAVE command to save the current

configuration file.

Determine the Current SYSnn

There are several ways to record the current SYSnn subvolume on your system.

You must use the current SYSnn subvolume if you need to fall back to your current

RVU. You must use a different SYSnn subvolume to create a new software revision.

1. At a TACL prompt, enter:

$SYSTEM SUPER 6> sysinfo

SYSINFO - T9268H01 - (01 OCT 2004) SYSTEM \ELI Date 04 May 2005,

22:00:18

System name \ELI

EXPAND node number 033

Current SYSnn SYS01

System number 000000

Software release ID H06.03.00

2. Issue a TACL FILEINFO command on $system.*.osimage to list the SYSnn

subvolumes on your system and determine which one is open.

$SYSTEM.SYS00

CODE EOF LAST MODIFIED OWNER RWEP PExt SExt

OSIMAGE 0 57354240 15DEC1999 9:57 255,255 NUNU 200 200

$SYSTEM.SYS01

CODE EOF LAST MODIFIED OWNER RWEP PExt SExt

OSIMAGE 0 57393152 05APR2000 8:56 255,255 NUNU 200 200